Step 9: Ethernet Settings

Step 1: Open Adapter Settings

• Press Win + R, type ncpa.cpl, and press Enter to open Network Connections.

Step 2: Modify Ethernet Properties

• Right-click your Ethernet connection and select Properties.

Step 3: Select Only These Two Options

• In the Properties window, make sure only the following two options are checked (scroll down to disable the other ones):

  • QoS Packet Scheduler

  • Internet Protocol Version 4 (TCP/IPv4)

• Click OK.

Step 4: Configure Advanced Settings

• Right-click your Ethernet connection again, select Properties, then click Configure.

• Go to the Advanced tab and apply these changes:

  

  • Advanced EEE: Disabled

  • ARP Offload: Disabled

  • Flow Control: Disabled

  • IPv4 Checksum Offload: Disabled

  • Large Send Offload v2 (IPv6): Disabled

  • Network Address: Not Present

  • TCP Checksum Offload (IPv6): Disabled

  • UDP Checksum Offload (IPv6): Disabled

If any option is not available, just skip it.

Step 5: Restart Your PC

• After applying these settings, restart your computer for changes to take effect.

Step 6: Apply Network Settings

• After restarting your PC, download this tool.

• Run it as Administrator and follow the on-screen instructions carefully.

Step 7: VPN Setup

Some games may require a different VPN setup depending on their anti-cheat, more information on Post Spoofing!

• Download and install the VPN from here.

• Select 1.1.1.1 with WARP

• Enable the VPN